Payment & Shipping Terms:
|Focus Length:||F=120mm||Pulse Width:||0.5-20.0ms|
|Positioning Accuracy:||Red Light||Cooling Way:||Water Cooling|
|Power Consumption:||<3KW||Power Supply:||220V, 50HZ|
|Optical Fiber Type:||Japan's Mitsubishi GI/SI||Pulse Frequency:||≤100hz|
laser soldering machine,
laser welding system
220V / 380V Fiber Laser Welding Machine 50HZ Power Supply With Handle Gun
1. Adopt CCD image monitoring system and is convenient for observation and precision position.
2. The energy of welding spot distributes evenly and has the best spot needed in welding.
3. It is suitable for different kinds of complicated welding, spot welding of different devices and seam welding of sheet
within 1 mm thickness.
4. Use ceramic condensing cavity imported from UK and is corrosion resistent and high temperature resistent. The service life of the cavity is 8 to 10 years and the service life of xenon lamp is more than 8 million times.
5. Could customize special automatic fixture and realize batch produce demand.
Fiber laser solderin machine is mainly for the welding of thin-walled materials and precision parts our products can realize spot welding, butt welding, stitch welding and seal welding. With features of depth width ratio, small weld width ,small heat-affected zone , small deformation, high welding speed, smooth weld, beautiful appearance, high welding quality, no pores, size-small focal spot, as well as precise positioning , WF series optical fiber laser welding machine can be accurately controlled ,and easily realize automatic optical fiber transmission .They are widely used in battery industry, IT industry, electronics, optical communications industry, sensor industry, hardware industry, the auto parts industry, mold repair welding industry, jewelry industry, glasses industry, porcelain teeth, the solar energy industry, and electric industry.
|Maximum pulse energy||45J||60J||75J||90J||100J||120J|
|Maximum peak power||5KW||5KW||6KW||6KW||9.9KW||9.9KW|
|Pulse repetition frequency||1-30Hz||1-100Hz|
|Unit of time continuous pulse width (1s )||10ms/s||100ms/s|
|Spectrophotometric method||Energy splitting or time light splitting|
|Closed loop feedback control mode||Arbitrary waveform real-time control power feedback|
|Energy spectral inhomogeneity||<±3%|
|Supporting system||According to product processing needs, you can select the following supporting table system:
- Galvanometer type welding table
- Two-axis welding table
- Robotic welding table
- Optical communications professional table
|Optical fiber output number||Maximum of 4 fiber output|
|Optical fiber type||Japan's Mitsubishi GI/SI|
|Aiming at the location mode||Laser diode red indicator (CCD option)|
|Cooling mode||Enclosed circulating water cooling||External water cooling machine|
|Device power dissipation||1.5KW||2.5KW||4KW||6KW||12KW||20KW|
AC380V±15% 50/60 Hz
Energy negative feedback
The working principle of Energy negative feedback is to gain an energy detection device at the output end of the laser as to detect laser energy size. Real-time feedback of the signal to the control side is then compared with the energy set theory, forming a closed loop control system to achieve the purpose of accurate control of the laser energy output as follow:
The negative energy feedback technology allows the laser output energy with good repeatability, simply put, is to ensure that each output of the laser energy stability, which can be effective in reducing the defect rate of the product.
Output waveform can be any set of welder materials, shape, etc.
Specific workpiece welder process, according to the shape and materials of the work, change the output waveform of the laser energy can greatly improve the welder quality, and even some traditional laser welder problems can be solved by changing the laser output waveform.
The laser can achieve multi-fiber output at the same time
Compared with traditional hard light output, you can increase the freedom of processing, process multi-beam and multi-bit at the same time, providing the conditions for more precise welder.
Welding or welder timeshare can be realized through the energy of light or time light splitting.
Rich in the I / O interface, users can easily control the welder machine
The key components are imported, to ensure the quality of the product
1 years warranty for this fiber laser welding machine
Our customer will be fully trained for the operation and maintaining technology after the order confirmed
24-hour full after sales service: our skilled engineer will help customer to solve the problem by MSN, SKYPE,QQ etc in time when problems happen, if necessary, overseas service is available.
2. Quality Control
Skilled and strict Quality Inspection Team is available during the material purchasing and production procedure.
All finished machine we delivered are 100% strictly tested by our QC department and engineering department.
3. OEM Service
Customized and OEM orders are welcome due to our aboundant experiences.
All the OEM services are free, customer only need to provide us with your logo drawing, function requirements, colors etc.
No MOQ required.
None of your personally identifiable information ( such as your name , address , email address ,bank info ,etc ) will be disclosed or shared with any third parties.
Contact: All of your inquiries or questions or helps will be answered within 24 hours, even in holiday. Also, please feel free to call us if you have any emergency questions