Payment & Shipping Terms:
|Operation Interface:||Touch Screen||Maneuvering Area:||Protected Type|
|Gross Weight:||60KG||Feeding Way:||Vacuum Suction And Blowing Type|
Double Y single Z automatic lock platform
|Operation interface||Touch screen|
|Maneuvering area||Protected type|
|Feeding way||Vacuum suction and blowing type|
|Voltage||AC 220V 50HZ|
|Alarm project||Float Screw loose Leakage locking|
|Driving force||Progressive motor(servo motor option)|
|Drive way||Synchronous belt(ballscrew option)|
Working principle of full-motion lock screw machine
The automatic screw-feeding machine includes a screw automatic alignment unit, an automatic screw conveying unit and an automatic screw tightening unit, and a detecting unit during the locking process.
The automatic screw-arranging unit of the automatic screw-feeding machine mainly arranges the loose screws in a neat arrangement and a single output. The entire column unit can be realized by a vibrating plate sorting mechanism or by a rocker arm sorting mechanism.
The automatic screw conveying unit of the automatic screw-feeding screw machine mainly transports the entire set of screws to the working head of the screw tightening unit.
The automatic screw tightening unit of the automatic transfer screw machine includes a rotary power part and a screw introduction part. Commonly used for the introduction of screws are air blowing and adsorption. In general, the air blowing type is continuous and does not require the head to move back and forth, so the overall efficiency is better than the adsorption type. However, the blowing type itself receives the limitation of the screw shape and the aspect ratio, and not every screw is suitable for the blowing type.
The detection unit of the automatic screw-feeding screw machine includes the detection of the problem of the leakage lock, the floating lock and the jam of the screw.
1.There are magnet type adsorption and vacuum type adsorption screw.
2.Suitable for mobile phones, digital products, electronic gadgets, small household appliances.
3.Applicable to the majority of screws, strong versatility, the length of the screw than no requirements.
4.It can replace the manual specific screw lock pay operation, achieve mechanization production, reduce the labor of workers
Degrees. Traditional manual screw placement and alignment require a lot of time and effort.
5.No need to match external computer, can be single operation, easy installation, simple operation Settings, staff quickly grasp the operation and debugging, high-speed positioning precision, one person can manage several machines at the same time, save labor