Payment & Shipping Terms:
|Max Power Of Single Impulse:||100J||Pulse Width:||0.5-20.0ms|
|Positioning Accuracy:||Red Light||Cooling Way:||Water Cooling|
|Power Supply:||380V, 50HZ||Brand:||SUPERNOVA LASER|
laser soldering machine,
laser welding equipment
300W 220V Advertising Letters Fiber Laser Welder Fiber Laser Welding Machine
1. Adopt CCD image monitoring system and is convenient for observation and precision position.
2. The energy of welding spot distributes evenly and has the best spot needed in welding.
3. It is suitable for different kinds of complicated welding, spot welding of different devices and seam welding of sheet
within 1 mm thickness.
4. Use ceramic condensing cavity imported from UK and is corrosion resistent and high temperature resistent. The service life of the cavity is 8 to 10 years and the service life of xenon lamp is more than 8 million times.
5. Could customize special automatic fixture and realize batch produce demand.
Fiber laser soldering machine is widely used on aviation, machinery, mobile manufacture, communications, chemical industry, electrical equipment, hardware and automobile manufacture
Automobile Spare Parts: hydraulic jacking lever, filter, sensor, electromagnetic valve
Lithium Battery: columnar nut cap
Mobile phone: tab, backboard
Electronic Industry: sensor, motor rotor, capacitance, relay
Kitchenware & Bath Appliances: kettle, faucet, hook, trough, kitchen ventilator etc.
SPECIFICATIONS FOR HANDHELD LASER WELDING MACHINE
|Max laser power||300w|
|Laser cavity configuration||Gold coated cylinder cavity|
|Pump Lamp||Double Xenon Lamp|
|Max power of single impulse||100J|
|Laser welding frequency||0-100Hz|
|Instability of energy||＜2%|
|Minimal beam diameter||0.3mm|
|Adjustable scope of laser spot||0.2-3.0mm|
|Continue working time||16hours|
|Transmission system||Fiber optical transmission system|
|Fiber optical length||5m standard|
|Cooling system dimensions||Water cooling|
|Consumable||Xenon lamp,Filter element,Protective lens,Argon|
Energy negative feedback
The working principle of Energy negative feedback is to gain an energy detection device at the output end of the laser as to detect laser energy size. Real-time feedback of the signal to the control side is then compared with the energy set theory, forming a closed loop control system to achieve the purpose of accurate control of the laser energy output as follow:
The negative energy feedback technology allows the laser output energy with good repeatability, simply put, is to ensure that each output of the laser energy stability, which can be effective in reducing the defect rate of the product.
Output waveform can be any set of welder materials, shape, etc.
Specific workpiece welder process, according to the shape and materials of the work, change the output waveform of the laser energy can greatly improve the welder quality, and even some traditional laser welder problems can be solved by changing the laser output waveform.
The laser can achieve multi-fiber output at the same time
Compared with traditional hard light output, you can increase the freedom of processing, process multi-beam and multi-bit at the same time, providing the conditions for more precise welder.
Welding or welder timeshare can be realized through the energy of light or time light splitting.
Rich in the I / O interface, users can easily control the welder machine
The key components are imported, to ensure the quality of the product